What is fiber porcelain plate?
1. The fiber porcelain plate is a vitrified glazed fiber porcelain plate that is co-melted and infiltrated into one. It is a composite structure of vitrified printing glaze layer, surface glaze layer, interface glaze layer, and aggregate base layer. Melting and infiltration are combined into one. The aggregate base layer is composed of plastic ceramic raw materials and inorganic fiber skeleton. The aspect ratio of the inorganic fiber is 1:≤20. The skeleton is a network structure interwoven with layers of inorganic fibers. ; Length × width × thickness = 2000~3500mm×1000~2000mm×3~6mm.
2. The surface of the fiber porcelain plate is bright or matte, the glaze is dense, there are no pores visible to the naked eye, it has wood-like elasticity, and the cross-section is in a fibrous crystal state; it forms a large-format, ultra-thin, high-elasticity, surface glass The surface is smooth, low water absorption, not easy to be polluted, easy to clean, easy to clean, and a new type of characteristic fiber porcelain plate with good processability. The surface can also be painted and sintered with various patterns and patterns to enhance the beautification and decoration performance.

Components and features of the new conveyor belt system may include

Frame: The system's frame holds all moving parts together for safe and reliable operation.

Conveyor Belt: A long strip of thick, durable material through which material is transported from one place to another.

Conveyor Belt Holder: Rollers help the conveyor belt stay on course and keep moving quickly. The rollers hold objects in place and prevent the belt from sagging.

Drive: The motor can use variable speed or constant speed reduction gears to drive the conveyor belt. An effective drive unit must constantly help the belt run continuously, reverse smoothly, and reorient repeatedly.

Pulleys: The conveyor belt should run around two or more strategically placed pulleys. Pulleys control the motion of the belt and perform critical functions such as driving, redirecting, steering, tensioning and tracking the belt.

Clamping straps: Clamping straps are used on various machines to hold down fixtures and working parts.

Additional Modules: Most additional components are installed for further reinforcement. Rollers support the belt from the inside of the system, brackets and side rails support the outer frame.

Conveyor belts can be made from a variety of materials, including rubber, metal, leather, fabric, and plastic. Consider the conditions under which the system will operate to ensure that the belt material is of the proper thickness and strength.

Advantages of high frequency vibration screen

The characteristics of high frequency vibration screen:

1. The use of laminated screen mesh, the single-layer aperture is increased, the life of the screen mesh is increased, and it is anti-blocking and anti-wear;

2. The vibration screen has simple structure, convenient maintenance, durability and low failure rate;

3. The installation angle of the high-frequency vibration screen can be adjusted at will according to the user's requirements;

4. High vibration frequency and low amplitude can effectively reduce the surface tension of the pulp, which is conducive to the separation and stratification of fine and heavy materials and accelerates the screening of fine and heavy materials;

5. Rubber spring support screen frame, vibration isolation and sound absorption, low noise, small dynamic load of equipment, no need for concrete foundation;

6.The power of each high-frequency vibration screen exciter is only 0.15kw, and the power consumption of each whole machine is below 1.2kw, and the energy saving effect is excellent.