How to Install Glazed Porcelain Tiles
Installing glazed porcelain tiles is a relatively simple process that can be done by most homeowners with some basic tools and knowledge. Here is a step-by-step guide on how to install glazed porcelain tiles:

Prepare the surface: Before installing the tiles, it is important to prepare the surface by cleaning it thoroughly and ensuring that it is level. Any cracks or holes should be filled and sanded smooth.

Measure and plan: Measure the area where the tiles will be installed and create a plan for how the tiles will be laid out. This will help ensure that the tiles are evenly spaced and that any cuts are made in the least visible areas.

Apply adhesive: Apply a layer of tile adhesive to the surface using a notched trowel. Be sure to follow the manufacturer’s instructions for the type of adhesive being used.

Lay the tiles: Starting in one corner, carefully lay the tiles onto the adhesive, using spacers to ensure even spacing between each tile. Use a level to ensure that the tiles are flat and even.

Cutting tiles: If necessary, use a tile cutter or wet saw to cut any tiles that need to be trimmed to fit around edges or obstacles.

Grouting: Once all of the tiles have been laid and the adhesive has had time to dry (usually 24 hours), remove the spacers and apply grout between the tiles using a rubber float. Be sure to follow the manufacturer’s instructions for mixing and applying the grout.

Finishing touches: After the grout has dried (usually 24-48 hours), use a damp sponge or cloth to remove any excess grout from the surface of the tiles. Apply a sealant to the grout lines if desired.

By following these steps, homeowners can successfully install glazed porcelain tiles in their homes.